Fluid couplings
Improve the starting capability of electrical motor, secure motor against overloading, damp shock, load
fluctuation and torsional vibration, and stability and load distribution in situation of multi motor drives.
Belt conveyers, csraper conveyers, and conveyers of all sorts Bucket elevators, ball mills, hoisters, crushers,
excavators, mixers, straighteners, cranes, and so forth.
Devoid of special needs the following technical data sheet and electrical power chart are utilized to select the right size of
fluid coupling with oil medium in accordance on the energy transmitted plus the speed of motor, e, i, the input from the fluid coupling.
When ordering, please specify the dimensions on the shaft ends of motor and driven machine(or reducer)like
diameter, tolerance or match from the shafts (if no tolerance or match is specified, the bores will likely be machined the H7),match length in the
shafts, width and depth on the keys (of observe the standard No. enforced).For ordering the fluid couplings with belt pulley, brake
pulley or even the particular needs please state the technical data in detail.
YOXz is really a coincidence machine with moving wheel which can be in the output level of the coincidence machine
and it is connected with elastic axle connecting machine (plum blossom style elastic axle connecting machine or
elastic pillar axle-connecting machine or perhaps the axle-connecting machine designated by consumers). Typically
you will find three connection kinds.
YOXz is inner wheel driver which has tight framework along with the smallest axle size. The fittings of YOXz have a broad
usage, easy construction plus the size of it has basically be unified during the trade. The connection type of YOXz is
the axle size of it really is longer but it is pointless to move the electromotive machine and decelerating machine. Only
demolish the weak pillar and connected spiral bolt can unload the coincidence machine so it is severe hassle-free.
Consumer should offer you the dimension of electromotive machine axle (d1 L1) and decelerating machine axle (d2 L2). The
wheel dimension (Dz Lz C) inside the table is only for reference, the actual dimension is decided by clients.