DC MOTOR PUMP GROUP 1
General Description
Consisting of the hefty duty DC motor as well as CB1S gear pump, this pump motor group is an great hydraulic electrical power unit for mobile hydraulic equipments, such as automobile carriers, mobile aerial lifts, and backup programs.
DC MOTOR PUMP GROUP two
General Description
This motor pump includes 4.5″ DC motor, a CBSR gear pump with built-in relief valve and test valve.
DC MOTOR PUMP GROUP 3
Standard Description
This motor pump includes a 4.5″ DC motor and a CBSR gear pump which has a common power up/gravity down circuit which has a relief valve, a check valve as well as a solenoid release valve.
Special Notes
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean each of the hydraulic elements concerned prior to mounting the energy unit.
3. Viscosity with the hydraulic oil shoud be 15~68 cst, which should also be clean and totally free of impurities. N46 hydraulic oil is recommended.
4. The electrical power unit ought to be mounted horizontally.
5. The relief valve stress is preset about 25% greater compared to the working stress.
six. Flow control valve for lowing speed adjustment is accessible unpon request.