Disc coupling

Our disc packs are manufactured working with substantial grade stainless steel
(AISI-301), making sure large strength, high endurance to fatigue, and resistance to most environmental problems.
Disc couplings utilize unitized disc packs with both six or 8 bolt designs. The 8 bolt style and design can transmit better torque than the six bolt layout, nevertheless, it can be not in a position to accommodate as substantially angular misalignment.
Couplings can be fitted with overload bushings to guard the disc pack during momentary torsional overloads.
Couplings are provided in a selection of configurations to fit most applications. Also, ?¡¥s engineering department can customize a coupling to meet a lot of exclusive demands this kind of as close coupled, drop-out centers, electrically insulated, vertical mounting, and safety couplings. A notable layout presented by could be the decreased moment (DI Form) coupling that meets the anti-flail gadget needs mandated in API-610 even though giving a low fat and brief center of gravity to bearing distance.
The style and manufacture of disc couplings is integrated into a certified Top quality System according to ISO-9001 to fulfill the higher excellent specifications of clients.
Rewards in the Disc Coupling
Eliminates the want for lubrication and coupling maintenance
Coupling is often inspected with out disassembly
Condition of disc packs is usually inspected that has a strobe light although the machine is running
Note: It truly is not advised that couplings be operated with out coupling guards.
Easy to assess tools misalignment
Torsionally rigid devoid of any backlash
No wearing components
\Resistance to harsh environments
Long life when correctly sized and aligned
High electrical power density (increased torque for a offered outside diameter)
Supports the API-610 Common up to 3,800 RPM
Unitized disc packs assure repeatability required for meeting the balance and piloting specifications as mandated by API-610
Offered with Overload Bushings to guard the coupling from momentary torque overloads
Prevents the disc pack from being plastically deformed
Allows for shorter BSE (shaft separation) mainly because bolts is usually turned to face inward
Special orientation of bolts will allow the bolts to be tightened using a torque wrench as an alternative to nuts (Ordinary should be to tighten nuts with torque wrench)