Any harm on the teeth surfaces of the sprocket diminishes the daily life from the conveyor chain.
With typical sprockets, substantially worn sprocket teeth were repaired by teeth padding or the complete sprocket was replaced. In both case, restore was expensive and with teeth padding, accuracy was impaired. We developed new sprockets with detachable teeth for independent replacement. This sprocket is extremely rated by our clients for that dramatic financial savings in expense and time.
Structure
The teeth is often replaced by two solutions: personal tooth replacement or sectional teeth substitute.
The bolts and nuts utilized for mounting the teeth on to your sprocket are spot-welded to prevent loosening.
The respective structures are illustrated around the correct.
The above photograph and the leading correct illustration display a sprocket for personal tooth substitute. Since the joint face concerning the replaced teeth and the sprocket is formed inside a exclusive arc, the bonding accuracy is higher and the sprocket power is enhanced. On top of that, because the load acting on the mounting bolts is decreased, there exists significantly less possibility of loosening. This sprocket construction is patented.
There are actually two forms of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are used for significant sprockets acquiring hefty loads and welded sheet steel hubs for other applications.