DUMP TRAILER Electrical power UNIT-DOUBLE ACTING
This energy unit includes a power up electrical power down circuit with load holding on each A & B ports. A strain compensatred movement management is often added to circuit to manage the decent pace of the cylinder.
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all the hydraulic components concerned in advance of set up of the electrical power unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst, which must also be clean and cost-free of impurities. N46 hydraulic oil is proposed.
four. The electrical power unit must be mounted horizontally.
five. Check the oil level during the tank just after the original running of the energy unit.
six. Oil modifying is needed right after the first a hundred operation hours, afterwards when each and every 3000 hrs.
DUMP TRAILER Electrical power UNIT- SINGLE ACTING
This power unit features a electrical power up gravity down circuit. Commence the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve could be provided if needed. Also a pressure compen sated flow manage can be extra to the circuit to regulate the descent velocity with the cylinder.
Remark: Please consult our sales engineer for your different pump displacement, motor energy or tank capability.
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all the hydraulic components concerned just before set up of the power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst,which really should also be clean and totally free of impurities.N46 hydraulic oil is encouraged.
four. The power unit need to be mounted horizontally.
5. Check the oil degree in the tank soon after the initial running of the energy unit.
6. Oil transforming is required immediately after the first one hundred operation hrs, afterwards once each 3000 hrs.