Fan Engine, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, taken off unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric electric motor, capacitor and quickness control change is still hooked up nevertheless the cord itself is generally detached as observed in the photos. (Find “Control Notice” below for change type.)
T (See “Software Notice” below for make use of in a variety of other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is definitely½” (0.500″) diameter x 2 ½” long with a collection screw easy. There are (4) threaded electric fan motor china mounting lugs on leading of the motor, ½” long x .16 dia. with washers and nuts. The studs appear to have got 4mm threads and to be on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electrical motor) is Clockwise.

Control Take notice: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH variations in the images). These two types of switches both control the engine just as (but you have a rotating knob and you have a pull-chain). If you order several engine at a time, we can do our best to supply your purchase with each one sort of control or the excess.
Application Note: USUALLY DO NOT use this electric motor in a nonfan software. This is a completely enclosed fan electric engine and designed to have constant ventilation over the motor casing for cooling. The casing isn’t vented and the electric powered engine will overheat and enter automated thermal overload if run in a nonfan plan where there isn’t strong ventilation past the engine. (Caution Note: the electric motor will restart instantly when it cools back off.) Using this electric motor for applications apart from 18 & 24″ TPI fans could also overload the electric motor and cause it to proceed into automatic thermal overload. (Your companion blade from another manufacturer may possess a steeper blade angle.)
Origin: This electric electric motor is manufactured in China.