Basic Description
Outfitted using the zero leak bidirectional checking sole-noid valves, this electrical power unit is intended for the operation of two independent circuits. Which are respectively to the main and subordinate platforms from the double scissors lift. Two cut-off valves are used for lowering the machine manually in case of electrical power loss. If more independent circuits are needed for the application please get in touch with us for availability.
Remark: one. Please seek the advice of our product sales engineer for the distinct pump displacement, motor power or tank capacity.
two. CSA or UL licensed motors can be found on request.
Distinctive Notes
one. The AC motor is of S3 duty cycle, which may only operate intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean each of the hydraulic elements concerned ahead of set up of the electrical power unit.
three. Viscosity from the oil shoud be 15~46 cst,as well as the oil must be clean and free of impurities,N46 hydraulic oil is encouraged.
four. The power unit really should be mounted vertically.
five. Check the oil level within the tank soon after the original operating in the electrical power unit.
6. Oil altering is needed soon after the original one hundred operation hrs,afterwards once every single 3000 hrs.