FMM Form Mill Couplings
The FMM Form coupling includes one particular normal flex hub, 1 universal straight bored hub as normal, two sleeves and one accessory kit. This coupling is supplied with exposed bolts as regular. Shrouded bolts can be found on request by dimension 5.5.
Attributes
For prolonged existence
Common 20° 
pressure angle
Heat handled bolts for higher power
Corrosion resistant bolts and nuts for ease of maintenance
Supplies parallel, angular misalignment and finish float
Flex Half coupling interchangeable with sector standards
Prolonged Universal Hub supplied to customer specs with straight or tapered bores
Ordering Details
Application: Driver and Driven.
Form and size of coupling, horizontal, vertical and so on.
Power: Motor horspower or torque necessity.
Velocity: Motor RPM or Driven RPM.
Distance amongst shaft ends (BSE).
Shaft sizes.
Taper per foot and length of taper if tapered bore is needed.
Specify counterbore dimensions if sought after.
Submit a drawing if obtainable.
FHDFS Form Floating Shaft Couplings
The FHDFS Kind coupling consists of two flex-rigid couplings and one floating shaft. The coupling is supplied with all the rigid hubs outboard except if otherwise specified. The coupling comes with exposed bolts only.
Features
Flex Hubs for long existence
Common 20° pressure angle
Heat treated bolts for better strength
Corrosion resistant bolts and nuts for ease of maintenance
Accommodates parallel and angular misalignment
Removal of center assembly enables forease of servicing without repositioning machinery
Rigid hubs outboard allows for larger shaft diameters
Designed for high-torque low-speed applications that take place in mill operations
Ordering Facts
Application: Driver and Driven.
Form and size of coupling, horizontal, vertical and so on.
Energy: Motor horspower or torque necessity.
Speed: Motor RPM or Driven RPM.
Distance between shaft ends (BSE).
Connecting products shaft sizes.
Specify which hubs are to become applied about the equipment (Rigid or Flex).
Rigid hubs are going to be made use of around the products except if otherwise specified.
Length of floating shaft might affect max angular misalignment.