The EP Greenhouse geared motor is a compact and lightweight reduction gear motor with an integrated limit switch system that is ideal for assembly of a locally available electric electric motor. The geared motor can be used in manually-managed or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-install EP gear motor is usually rainproof and windproof. The gear motor includes a high protection course (IP65) and can be utilized within an ambient temperature of 0-60 °C.

The low-noise geared motor for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmission ensures that the drive shaft is definitely locked when the reduction geared motor is not running. The completely sealed reduction gear driver has an growth chamber with a diaphragm to keep carefully the gear oil at a minimal pressure under all circumstances, even at high temperature ranges. Thanks to the usage of an growth chamber, the geared motor can be installed in any position. There are no limitations, because there is no dependence on a bleed plug. The sealed reduction gear reducer keeps the apparatus essential oil of the gear driver in optimal condition for its entire operating life time. The gear reducer is ideal for discontinuous use, operating class s3-30%, with a maximum activation period of 25 minutes.

The Gear box reduction reducer has an FT85 motor assembly flange, to which the right IEC standard motor can easily be installed (EN 50347).

The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed in an integrated chamber and is definitely enclosed by an impact-resistant plastic cover. The limit switch system is accessible and simple to adjust. The limit switch system’s maximum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gearbox has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The reducer for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of software of 4-pole electric motor.
Protection class IP65.
May be used in ambient temps of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 a few minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).