HK style roller chains

Downsizing Your Process with Higher Power Chains
HK type roller chains conform to H form of ANSI, and their thickness of inner and outer website link plates are equal to these with the next more substantial dimension chain. As a result, HK variety roller chains are larger in tensile power by about 20%and in highest allowable load by about 15% than these of regular roller chains. Since the fat from the chains is also bigger, HK variety roller chains are appropriate for your application of hefty duty at reduced speed.
Encouraged utilizes
?Optimal for destinations exactly where greater power is needed but huge and heavier chains are not able to be employed.
Selection of chains
Pick a proper HK type roller chain determined by “Low-speed selection”
For the highest allowable load, see the following table of dimensions.
HK sort roller chains can be found up to triplex.
Sprockets
Use common sprockets to get a simplex HK roller chain Because the transverse pitches are more substantial than those of common chains in the situation of duplex or triplex, conventional sprockets cannot be employed. Refer on the sprocket tooth profiles for HK
Connecting link and offset website link
The tensile strength of connecting backlinks and offset hyperlinks are listed over the left, but the highest allowable load is lower than that of the base chain. Please seek the advice of us should you may have any issues. It is actually proposed to implement the connecting hyperlink of interference-fitted (FJ, HJ)
Never ever make the holes on the connecting plate larger and in no way make the pins thinner to facilitate the perform for fitting the pins to the connecting plate, considering the fact that otherwise the fatigue power might be lowered.
Selection of chains
Pick a appropriate HK type roller chain based upon “Low-speed selection”
For that maximum allowable load, see the next table of dimensions.
HK form roller chains are available up to triplex.
Sprockets
Use typical sprockets for any simplex HK roller chain Since the transverse pitches are bigger than people of standard chains inside the situation of duplex or triplex, regular sprockets are unable to be employed. Refer on the sprocket tooth profiles for HK
Connecting link and offset website link
The tensile power of connecting back links and offset links are listed to the left, but the greatest allowable load is lower than that from the base chain. Please consult us must you may have any questions. It is suggested to make use of the connecting website link of interference-fitted (FJ, HJ)
Under no circumstances make the holes from the connecting plate bigger and hardly ever make the pins thinner to facilitate the work for fitting the pins in to the connecting plate, considering that otherwise the fatigue strength will be lowered.