features a unique embedded magnetic device that increases productivity with a keyless tap to unlock the housekeeping cart or Space Station cart-leading console and computerized locking upon door closure. The eliminates lock/key breakage and related alternative costs.
stainless-steel or powder-coated housekeeping carts, newly redesigned with more style and functionality.
Easy keyless entry
Cabinet automatically locks when door closes
Simply no broken locks and keys
Able to retrofit about Shuttle Series® rounded-corner carts
The door lock assembly is a part for your washing machine and tells the washer that the door is closed and locked into place. If the switch has shorted out and not locking, it is certainly no more delivering the message to the machine and it’ll certainly not latch into place. If you discover that your door will not close, open up, or start, it is more than likely a concern with the locker move assembly. The swap is located behind the front panel. You will need to remove the gasket to attain the switch.
The ignition lock assembly requires a key be inserted to start the engine. It is essentially a protection device that prevents the vehicle from being started with out a essential. The ignition lock assembly also acts as a change to carefully turn on and shut off the engine, interior features, and the lights. Inside the ignition assembly happen to be pins and tumblers that ensure only the right key will be able to start the vehicle. If those tumblers are worn out or sticking, the ignition lock assembly may not turn also with the correct important inserted. If the main element or another international object breaks off in the ignition, the main element will not be in a position to be inserted all the way and 
won’t turn. Occasionally, the ignition lock assembly may stay in the ‘on’ or ‘run’ situation, and the ignition won’t manage to turn all the way off.
Some keys only fit in the ignition one way. Flip the main element over and check it out again before replacing the ignition lock assembly.
The steering lock might not allow the key to carefully turn in the ignition. If the steering lock is normally engaged, make an effort pulling on the steering wheel either way while wiggling the key in the ignition.
Ignition key will not turn in the ignition assembly
Key is stuck in the ignition
Engine will not turn off
Ignition important is cracked because of becoming turned in a stiff assembly.
Key is broken in the ignition lock assembly.
If the ignition lock assembly will not turn and your vehicle will not start, you can be left stranded looking forward to a tow and a cab. If the ignition assembly is usually trapped in the “on” position, your automobile can be left vulnerable to theft with the keys stuck inside. Replace the ignition assembly when symptoms get started.
Lock housing (foundation plate with mounting bolt holes and cover plate with rung attach.
Lock hook – solid lightweight aluminum hooks that engage rungs.
Finger – solid aluminium finger – depress the hook to allow disengagement of the rung.
Spring – stainless steel torsion spring- provides automatic action to assembly.
Shoulder bolts & nuts, 3 each shoulder bolts & nuts contain the parts set up and hold the cover plate over the bottom plate.
Cover plate assembly carries a welded light weight aluminum tube piece that accepts the lock rung and rivets. Cover plates are made in 2 different types.
Replacement lock assemblies are sold in pairs only and include instructions and all mounting fasteners.