Material Dealing with Power UNIT 2
General Description
This energy unit functions electrical power up gravity down circuit. Activate the start off solenoid to start out the motor to lift the machine. The lowing motion is activated through the solenoid valve together with the lowering speed managed through the strain compensated flow control valve. Items of this series is usually extensively utilized in the industry of logistic devices which include fork lift, mini lift table, and so on.
Particular Notes
1. The duty of this energy unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean all the hydraulic parts concerned in advance of mounting the energy unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst,which must also be clean and cost-free of impurities, N46 hydraulic oil is advised .
four. Oil modifying is required immediately after the first one hundred operation hrs,afterwards after each and every 3000 hrs.
five. The energy unit must be mounted horizontally.

Material Handling Energy UNIT one
General Description
This energy unit is designed for your fork lift business, consisting of extremely productive gear pump, DC motor, guide increase and reduce valve, tank, ect. The up and down motion are managed by the lever on the manual release valve, which is equipped with an electric switch to activate the motor. The lowing pace is managed by the pressure compensated flow manage valve.
Particular Notes
one. The duty of this power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean all of the hydraulic components concerned before set up of the electrical power unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst, which should really also be clean and cost-free of impurities, N46 hydraulic oil is advised .
four. Oil changing is required right after the first a hundred operation hrs, afterwards after every 3000 hours.
5. The power unit proven is intended to be mounted horizontally.