Ever-Power Corporation , announces its right position NEMA gearbox designed to IP65 specs for use in clean straight down applications in packaging apparatus and comparable machinery. Rated backlash is definitely 30 arc-minutes with choices for 4 or 8 arc-minutes. The NEMA 34 flanged gearbox has 440C Stainless steel bearings with seals and Nitrile o-bands shaft seals on both insight and output. All fasteners are stainless steel. Hard anodized light weight aluminum or 316 Stainless housings are 
available. Customizing for other than NEMA motors or your unique application is easily done.
This Nema 17 stepper motor with 39mm body and 1.68A rated current, integrated with a 41mm Planetary gearbox of 5:1 equipment ratio. It’s a good solution to applications that with unique space but require low swiftness and/or high torque.
Electrical Specification
Manufacturer Part Amount: 17HS15-1684S-HG5
Motor Type: Bipolar Stepper
Step Angle: 0.36 deg
Keeping Torque without Gearbox: 39Ncm(55oz.in)
Rated Current/phase: 1.68A
Phase Resistance: 1.6ohms
Voltage: 2.7V
Inductance: 3.2mH ± 20%(1KHz)
Gearbox Specifications
Gearbox Type: Planetary
Gear Ratio: 5 : 1
Efficiency: 95%
Backlash at No-load: <=15 arcmin
Max. Permissible Torque: 3.5Nm(495.6oz.in)
Moment Permissible Torque: 6Nm(849.7oz.in)
Max. Radial Load: 150N
Ambient Temperature: -10 – 90℃
Insulation Class: B
Noise: <=50 dB
Life: 20000 h
Physical Specifications
Body Size: 42 x 42mm
Motor Length: 39mm
Gearbox Length: 41mm
Shaft Diameter: Φ8mm
Shaft Length: 23.5mm
Key-way Length: 14mm
Number of Leads: 4
Lead Length: 320mm
Weight: 680g
Replaced by the 3325_0, a electric motor with the same NEMA size and same torque.
This NEMA-17 motor has an integrated Planetary gearbox with a 52/11 :1 ratio. It creates 16.2 Kg-cm of torque at 1.68 Amps.
When connected to a 1067 – EP, the 3317 has a maximum velocity of a little over 900 RPM. At the result of the gearbox, the stage angle is a little under 0.35°. When using the step angle in calculations, you should derive the precise step position by dividing 1.8° by the gearbox reduction ratio.
This particular revision of the 3317 is manufactured by a different manufacturer, but should behave very much like the revision 0 version.
Brother Gearmotors NEMA C-Face Speed Reducers
The gears in these NEMA C-Face speed reducers are high strength, maintenance free and can be mounted in virtually any path with their slip fit “O” ring style. Low to high decrease ratios, flange mount or foot install types, right position or hollow shaft correct angle types available. Match NEMA C-Encounter AC motors, brushless DC motors and brushed DC motors.
For 1/2 HP up to 3 HP Motors
NEMA C-Encounter, 140TC and 180TC input flanges
Inline Helical Gear Quickness Reducers
Right-Angle Hypoid Gear Speed Reducers
Product Lineup
Product Features
Allowable Torque
Downloads & Reference
NEMA C-Face Quickness Reducers Lineup
Output Power
Gear Type
Input Power
Gear Ratios
Maximum Input Speed
NEMA 56C Speed Reducers
NEMA C-Face Speed Reducers
Parallel Shaft (Foot Mount)
1/2 HP
1 HP
2 HP
3 HP
5:1 ~ 200:1 3600 r/min
Parallel Shaft (Flange Install)
Right-Angle Hollow Shaft
5:1 ~ 240:1
Right-Angle Solid Shaft
5:1 ~ 240:1
*Torque and Rate vary based on insight voltage and frequency, please review product specifications for details.
Longer Life
Compared to a spur equipment of around the same pitch diameter, Helical gears may transfer high loads in greater speeds. This is due to the gradual engagement of one’s teeth and smooth transfer of the strain.
Helical Gears
Lightweight and Compact
Die cast aluminum equipment housings make these speed reducers light in weight, allowing engineers to design more economical mounting provisions
Maintenance Free
High-quality synthetic grease is used in every gearboxes. They are loaded at the factory , nor need maintenance filling or level checks. This saves valuable time at create and eliminates concern for costly oil disposal necessary by the EPA.
Mount in Any Direction
These gearboxes are sealed with machine “slip” fit “O” rings and dual lip spring shaft seals upon both the motor and input shaft and result shaft driver. Hence, the gear motors can be mounted in virtually any conceivable direction without concern for the position of a breather connect.
NEMA Result Flange Planetary Gearboxes, Max. Ratio 1000:1
Spec
Gearing Arrangement:Planetary,Spur
Frame Size:42.6/60/90/115/145 mm
Ratio:3~1000:1
Nominal Output Torque:8~215 N.m
Nominal Input Speed:2500~4000 rpm
Max. Input Speed:5000~6000 rpm
Backlash:12~15 arcmin, three stages, 6~9 arcmin, single stage, 8~12 arcmin, two stages
Noise Level:60~67 dBA/1m
Enclosure:IP65
Lubrication:Synthetic Lubricant
Key Features
The Ever-Power EP Series gearboxes are equipped with a NEMA output flange with metric shaft, to offer exceptional torque ratings and convenience of many of present servo and stepper motion control applications. The gearboxes are drop-ins for most industry standards and obtainable from single to three phases with ratios 3:1 up to 1000:1, the very best backlash of < 6 arc-a few minutes. Adapters for all servo and stepper motors.
Features:
5 frame sizes with NEMA 17, 23, 34, 42, 56 flange and metric shaft
Backlash only 6 arc-minutes
Ratios up to 1000:1
High radial and axial loading capacity
20,000 hours service life
Synthetic grease, maintenance free
Reliable operating performance, affordable integration