Power-Locks offer serious clamping durability from a keyless locking unit. The precision made double taper design as basic as it is powerful. Available in bore sizes from 19 to 500mm, Power-Locks can attach any rotational component.

Disadvantage of ‘Poor Match’:

The procedure of fixing the fit by machining the keyway in to the shaft is tedious, long term and expensive.
It reduces the power and sum of torque confirmed shaft size may transmit.
Interference fits or welds prevent the operator from being able to easily remove the shaft from the hub for repair or replacement.
Avoid high-priced interruptions in your procedure! has the answer for you… ’s Power-Locks! is a leader within the power transmission industry in the quest to find a better approach to connect elements to shafts.

Features:

Well-engineered, adjustable and inexpensive device that solves engineering and maintenance complications connected with other connection alternatives.
Shaft-to-hub friction interconnection that relies on concentric surface pressure to affix gears, sprockets, and other travel pieces to a motor-driven shaft.
It helps to get rid of issues with keyway connections and limitation for QD and tapered bushings.
The frictional, keyless system permits transmission of high-torque and axial loads, and accommodate reversing, dynamic or shock loading.
Obtainable in both Inch and Metric sizes in a number of styles.
Advantages:

Allows for easy attachment of shaft to hub without money and time spent on machining or perhaps extra assembly labour.
Provides solid interconnection between the hub and the shaft by using a keyless mechanical interference suit to transmit torque or perhaps withstand axial thrust.
The pressure created through the mechanical interference expands the Power-Lock to remove the gap between the hub and the shaft; the friction bond between the Power-Lock and the shaft/hub create a zero backlash connection.
Easy installation as well allows the hub to be positioned more accurately on the shaft, and may facilitate angular Power Lock timing of the hub.
Power-Locks can be used in such common applications as the connection of timing pulleys, sheaves, conveyor pulleys, indexing applications, sprockets, gears, cams, levers, motors and hydraulics, clutches and brakes and flange couplings.
PowerLock connectors are plastic bodied single pole connectors for use in high electricity, low voltage applications. With current ratings of either 400amp or 660amp, the connectors will be keyed to avoid connections with the wrong line, and colour coded to meet various international 3 phase electrical standards. Body styles consist of those for panel installation or for fitting to an array of copper cables up to 300mm². A selection of extras and network connection units are available to enhance the number.
Power Lock exterior locking mechanisms are easy to use-even by low temperatures and when wearing gloves
in. foam grasp and a wide, padded wrist loop guarantee a comfy and secure hold; cork knob unscrews to create a monopod camera mount
Small-diameter trekking basket helps keep the carbide suggestion from sinking into soft dirt and sand
3-section shaft reaches 55 in. and collapses to 27 in.
The PowerLock is a light, money-saving air valve that reduces energy use by stopping airflow between vehicles and minimizing peak load charges. It reduces noise amounts, and when built with automatic-sensing technology, it could either delay or get rid of drying for pick-up beds or soft-top convertibles. The PowerLock weather valve car wash ability saver puts additional money back in your pocket while creating a quieter and safer environment in your tunnel.