Right Position Miter Gearbox Standard Features
Dimensions: right angle miter gear drive is 3-21/32″ x 3-15/16″ x 1-1/4″ deep
40% glass filled polypropylene
Weight: 10 ounces
Shafts: Ground high-tensile metal. Any shaft may be used as a drive.
Gears: Hardened directly miter gears
Bearings: Hardened steel ball bearings, long term lubrication
Mounting: Three shaft installation positions provide versatility in application
Versatile: 3 shaft connections are given for versatility in application
RAB-1 may be operated CW, CCW or Back again driven
RAB-1 is rated in 1/3 HP at 1800 RPM. Maximum acceleration is 3000 RPM
Benefits and Cost Savings
Longer service life
Greater tooth-to-tooth contact
The most efficient power transfer design under rated load conditions
Stainless steel shaft (Please specify series stainless needed)
Longer shafts lengths upon input and output
Right Angle Drives Made with Advanced Quality Construction
Ever-Power 2-Way Right Angle Gearboxes transmit power with calm, dependable spiral bevel gears. These superior bevel gearmotors feature hardened spiral bevel gears and non-magnetic stainless-metal shafts. Our Two-Way 90° Gearboxes are also compact and feature multiple mounting options. The fully enclosed design guarantees the integrity of the inner gears.
Additionally, the cast aluminum housing of Ever-Power s premium quality Correct Angle 2-Method Gearboxes are made for maximum strength and heat dissipation. The drives can be found with shafts of 3/8”, 1/2″, 5/8” and 3/4″ diameter in both 1:1 and 2:1 ratios. We are able to quote several exclusive types of shafts as well, including:
Two Way 90 Degree Gearbox Applications
Ever-Power Right Position Miter Gearboxes are used throughout dozens of industries in a huge selection of applications. Any make use of that demands the dependable transfer of swiftness or power, you could find a two-method gearbox bearing the Ever-Power brand. The compact design of Ever-Power Two-Way Right-Angle Gearboxes makes them ideal for applications such as for example:
Food Processing Equipment
Ovens & Dryers
Power Transmission Equipment
Ever-Power Inc, providing the most dependable and reliable transfer of power out there. Our company is well known for its innovative designs and producing high-quality motion control solutions made for engineered functionality and durability. We provide a range of gearbox designs and a broad selection of flexible shaft couplings to provide you with a comprehensive solutions for your mechanical and power tranny applications.
Right Angle Gearbox
Correct angle gearboxes are seen as a the actual fact that the drive shaft and the output shaft are organized at an angle of 90 degrees. With respect to the gearbox type, the axes can intersect in a plane or cross on two parallel planes, which results within an axis offset.
Right angle gearboxes are realized with various kinds of gear teeth or a mixture of different gearing types. The most popular single-stage gearbox types are bevel and worm.
Because of the high single stage ratios and the low performance level, worm gears can achieve a self-locking effect. With worm gears it is also possible to possess a hollow shaft as the drive shaft.
Bevel gearboxes include various kinds of gearing. Bevel gearboxes with intersecting axes are recognized using bevel gearing with straight, helical or spiral the teeth. Hypoid gearboxes have helical bevel gearing with which the axes cross with an axis offset. The bandwidth of technically practical ratios with which the bevel gear stage can be realized is bigger with hypoid gearboxes than with the classical bevel gear teeth.
Bevel gearboxes can also be combined with other gearbox types. A regular app in this respect may be the mixture with a planetary gearbox, whereby the planetary gearbox could be linked upstream or downstream. This results in a wide range of overall multiplication factors and wide range of uses in lots of industrial applications.
The efficiency degree of bevel gearboxes is normally lower than that of coaxial spur gearboxes, particularly in comparison to planetary gearboxes. This is because the bevel gear stage generates a high degree of axial force and radial pressure, which has to be absorbed by appropriate bearings. This increases the power reduction, which is particularly significant in the drive stage of the gearbox.
The running noise and the transmittable torques of classic bevel gearboxes are also lower than with single spur equipment teeth. Hypoid gearboxes, on the other hand, are incredibly noisy and can transmit huge amounts of torque, but a considerable amount of bearing load happens in the bevel gear stage of these gearboxes.
In summarizing, a right angle gearbox is constantly used when the amount of installation space in the application form is limited, or an angular arrangement between the drive and the output is necessary by the application. Also, they are used in situations where the input shaft needs to be hollow in order to business lead through lines or make use of clamping sets.
The advantages of right angle gearboxes:
Use when installation space is limited
Can be coupled with other styles of gearbox
Quiet and high degree of torque when using hypoid gearboxes
Edition with hollow shaft possible
The disadvantages of right angle gearboxes:
Lower performance level than planetary gearbox
Decrease torques in single-stage ratio range
The Ever-Power, the original right angle gearbox drive, is widely recognized and is in use worldwide. The Ever-Power provides manual or power transmission of rotary motion in a COMPACT, standardized right angle unit.
Our standard line of bevel gearboxes can be found from stock in both an Inch and Metric Series, solitary or dual output shafts, 1:1 or 2 2:1 ratios, and grease lubricated for life and also have an operating temperature range of – 65 degrees F to + 200 degrees F ( – 54 degrees C to + 93 degrees C). Making use of carburized case-hardened Coniflex* bevel gears, all Ever-Power units utilize completely enclosed & sealed ball bearings.
The cast aluminum housings on our 90 level gearboxes are precision machined, on our CNC machining center and then coated with a chemical film to safeguard the material, and use flanged ends and side bosses for compact installation in an array of applications.
The shaft material used for sizes 1, 2 and 3 is #416 stainless steel. On the two 2:1 versions, the pinion shaft is certainly carbon metal. For the sizes 4 & 5, the materials is dark oxide carbon metal. Shafts can be provided with unique extensions (with flats, splines, holes, etc.) and /or specific lengths upon request.
In addition to our standard models, we will modify our units to meet up your design specifications! Our sales and engineering departments will be ready to help you together with your specific application requirements.
Through the years we’ve received questions about almost every aspect of the gearbox selection process. One of the questions we’ve had several times is, “Exactly what is a right-angle gearbox or a right-angle drive?” Or, more specifically, “How can be a right-position gearbox or drive not the same as a swiftness reducer or other types of gearboxes?”
First, let’s start with some basic terminology. It isn’t uncommon for the conditions “gearbox”, “drive” and “acceleration reducer” to be utilized interchangeably.
A gearbox is any gadget that uses a gear train to transmit torque/rpm and anything that uses a equipment to transmit torque/rpm is a gearbox.
A right-angle drive is a mechanism with a gear train that can transmit torque/rpm 90 degrees, to carefully turn a corner
A equipment reducer is a mechanism with a gear teach that can reduce rpm output. A result of decreasing rpm is raising torque at the same ratio swiftness is reduced.
A gear box may also be a speed increaser
The kind of gear used in the apparatus box defines it as a right angle or an inline drive.
A worm equipment drive is a right-angle drive since is a bevel gear
A spur equipment drive is inline
A helical equipment is inline but may also be a right-angle drive
So, what is a right-angle gearbox?
A right-angle gearbox is a gearbox with a right-angle change in direction of the shaft. It can be a 1 to 1 1 ratio or a multiple of just one 1 such as 2:1 or 15:1. If the ratio is 1:1 it really is a right-angle drive. If the ratio is usually greater than 1:1 it really is a right-angle acceleration reducer.
High torque ball bearing design
Solid one-piece aluminum housing seals gears from outdoors contaminants for smooth operation
Right- or left-hand rotation to convert power either direction
Quickly slides axially along the drive or driven shaft for flexible positioning
Alloy metal helical gears for high performance
Built-in 5 sizes with three types of output shaft : hollow, projecting or double-extended. Moreover, an additional output shaft can be installed reverse to the insight shaft.
Three input types are available : with projecting input shaft, with pre-engineered motor coupling (bell and joint) and pre-engineered COMPACT motor coupling.
Gear device body in engineering cast iron, EN GJL 200 UNI EN 1561 ribbed internally and externally to guarantee rigidity and machined upon all surfaces for easy positioning. The single lubrication chamber ensures improved heat dissipation and better lubrication of all the internal components.
The mechanism of these gearboxes consists of two Ever-Power spiral bevel gears with precision lapped profile, 16CrNi4 or 18NiCrM05 manufactured from steel.
The use of top quality bearings on all of the axis ensures extended life to the gearbox and allows high radial and axial loads.
Gearbox casing, flanges, bells and covers are externally painted with BLUE RAL 5010.
Right Position Miter Gearbox Standard Features