Rope pulley

Hanging Pulleys intended for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to switch than pulleys without a bearing.
Acetal, nylon, and aluminium are light-weight and corrosion resistant. Stainless steel may be the most corrosion resistant.
Styles C, D, and J have got a bracket on underneath for tying off 1 end of a rope.
Style K reduce the force needed to hold your load set up. Unlike standard pulleys, these have a V-groove for more grasp on your rope, and they ratchet when under load therefore they don’t slip in the additional direction. Pulley for3/8″ dia. rope could be established to ratchet even when not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Attach these pulleys to a set surface to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to change than pulleys with out a bearing.
Aluminum and nylon are light-weight and corrosion resistant. Stainless gets the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also called sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to change than pulleys without a bearing.
Acetal and aluminum are lightweight and corrosion resistant. Galvanized steel can be more corrosion resistant than iron and metal. Stainless steel may be the most corrosion resistant.
Easy-Open Hanging Pulleys for Rope-For Horizontal Pulling
Also called snatch blocks, these pulleys open so it’s easier to feed the rope through the housing-a totally free rope end is not needed. Use them to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Aluminum is more lightweight than stainless steel. Stainless steel is definitely more corrosion resistant than light weight aluminum.
Pulleys for Wire Rope-For Horizontal Pulling
Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to change than pulleys with out a bearing.
Acetal and nylon are light-weight and corrosion resistant. Stainless steel is the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Attach these pulleys to a flat surface to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and deal with systems. They require about 50 % the force of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Stainless steel is certainly more corrosion resistant than steel.
Hanging Pulleys intended for Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as block and tackle systems. They require about 50 % the drive of a single-groove pulley to move the same load. They have got a bracket on underneath for tying off one end of your wire rope.
Pulleys with a bearing are easier to convert than pulleys with out a bearing.
Nylon is much lighter than metal. Aluminum can be corrosion resistant. Stainless may be the most corrosion resistant.
Pulley with carabiner can mount to steel framing or hang as part of your rigging system.
Easy-Open Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it’s simpler to feed the rope through the housing-a totally free rope end isn’t needed. Use them to aid with horizontal pulling or to guide a rope.
Style D pulleys have a corrosion-resistant stainless steel housing.
Pulleys for Wire Rope-For Lifting
Utilize the bore to attach these pulleys on a shaft. These pulleys are also called sheaves.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Nylon pulleys are much lighter than steel pulleys.
Warning: Never make use of to lift people or items over people.
Mounted Pulleys for Wire Rope-For Lifting
Install these pulleys to a flat surface.
Pulleys with two grooves are for use in applications where multiple pulleys move an individual load, such as for example block and tackle systems.They are able to reduce the force needed to move the strain by up to two times compared to single-groove pulleys.
Pulleys with a bearing are simpler to change than pulleys with out a bearing.
Stainless pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never make use of to lift people or products over people.
Hanging Pulleys for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as block and deal with systems. They require about half the push of a single-groove pulley to go the same load.
Pulleys with a bearing are simpler to convert than pulleys without a bearing.
Style Electronic pulleys have bracket upon the bottom that lets you tie off one end of your wire rope.
Warning: Never make use of to lift people or products over people.
Easy-Open Hanging Pulleys for Wire Rope-For Lifting
Also called snatch blocks, these pulleys open so it’seasier to feed the rope through the housing-a totally free rope end isn’t needed.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as for example block and deal with systems. They require about 50 % the power of a single-groove pulley to move the same load.
Latch kits (sold separately) put in a latch to the swiveling hook on Design C to maintain rope secure.
Warning: Never make use of to lift people or products over people
Hanging Pulleys pertaining to Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are used in applications where multiple pulleys move an individual load, such as block and tackle systems. They are able to reduce the force had a need to move the load by up to 2 times in comparison to single-groove pulleys.
Pulleys with a bearing are simpler to turn than pulleys with out a bearing.
Style A pulleys possess a bracket on underneath for tying off 1 end of a rope.
Warning: Never use to lift people or items over people.
Easy-Open Hanging Pulleys for Rope-For Lifting
Also known as snatch blocks, these pulleys open so it’s simpler to feed the rope through the housing-a free rope end isn’t needed.
Warning: Never use to lift people or products over people.