Equipment Bins For Rotary Cutter’s, Shredders, and Choppers
RC 30 Collection Gearbox, 40hp Rated, 1-three/eight” SB enter, one-1/two” X twelve Spline Output. 1:one.47 Ratio Replace your broken rotary cutter gearbox with this substitute device. Why rebuild when you can substitute at such a low cost? These gearboxes have been utilised by Worksaver, HawkLine, Worldwide, WAC, Massive Bee, LMC, King Kutter, Midwest, Servis, Bush Hog, some Howse and numerous far more. Note: Real Gearbox could have a rounded housing or square as revealed, relying on recent availability, all interior areas are interchangeable and requirements for the two bins are identical! This gearbox functions a 1:one.forty seven Velocity Up equipment ratio for use on 5′ and larger diameter rotary cutters. Sector regular 1-three/eight” smooth diameter enter shaft with one/2″ shear bolt hole and retaining ring groove and one.fifty seven” diameter twelve tapered spline output shaft permit fitment to most light-weight, regular and medium obligation rotary cutters. Every single gearbox functions substantial pace ball bearing models and heat dealt with gears and shafts to guarantee prolonged life. Four bolt mounting matches market expectations. Every gearbox contains blade carrier mounting nut and cotter pin. Gearboxes are delivered dry and demand 16 ounces of 80-90W gearlube or equivalent. Disclaimer: Any and all Unique Products Manufacturer’s (OEM) tradenames, logos, drawings, colours, descriptive details and portion numbers are employed for elements identification functions only, and DN Products, LLC (DN) is in no way implying that any specific parts are OEM parts. Further, any use of the OEM’s tradenames, logos, drawings or portion quantities by DN is created only to support DN’s buyers, in obtaining the proper DN part or component which will substitute the OEM’s portion.
rotary cutter gearbox