XT LASER generally suggest that customers buy screw type oil-free air flow compressor, power is 7.5KW. The best pressure up to 9 kg (but also to achieve a minimum of 8 kg). The exhaust volume higher than 0.6 each and every minute. If the customer has bought the best oil atmosphere compressor with two oil filter. In order to reduce some drinking water and dirty.
The fiber laser cutting machine must meet the cutting requirements of varied components and complex shapes. But it does not really operate without a clean, dry, stable compressed air flow. The compressed air flow partly produced up of high real oxygen and high purity nitrogen to supply slicing gas to the trimming head. A part Screw Air Compressor For Laser Cutting china provided to the cylinder of the clamping table as a power source. And the last component is utilized to blow and dirt the optical path system.
From the air discharged from the compressed air through the dryer into the vehicle’s gas tank and gas control cabinet, through a advanced processing system, a gas dry and clean, and finally in to the three street, were used as cutting gas cylinder, power source and light street dust gas pressure to maintain the normal procedure of laser beam cutting machine.