Toothed belt pulleys
We always look for a solution
We generate toothed belt pulleys how you require.
Features:
· Unprocessed, preprocessed or fully processed
· Optionally available with suitable clamping element (Taper Lock System)
· Very wide selection of tooth styles (T, In, HTD,…) and pitches (imperial, 3M, 5M, 8M,…) available
· Low backlash toothing available
Usage of standard surface material
Consisting of 2 items Printed timing belt tires profile HTD-3M for 9mm wide timing belts.
Allowing you to connect the encoder to the primary spindle. Almost any inside diameter can be done.Afterwards the encoder is connected 1:1 to the spindle by the same outer diameter. It is also possible to print various other ratios if the area conditions make this necessary. In cases like this you can adjust the encoder to ensure that the pulse rate fits again afterwards.
Up to 150mm outside diameter are possible, the within diameter can be manufactured according to your wants. The within diameters are grated or proved, so they are later on exactly made to measure.
Materials: PETG, printed with an Ultimaker 2+
attachment:
Clamping match 3x M3 grub screws (arranged at an angle of 120°, pressed-in M3 nuts serve since thread)
or keyway (please specify desired dimension)
Important: Please indicate the approximate shaft dimension spindle shaft – encoder shaft, as well as the desired shaft diameter spindle shaft and encoder shaft. This info could be entered by e-mail or in the comment field by the end of the order..
Factory Direct Raw-Edge Toothed V-Belts for Tractors, Harvesters
Product Details
Type and Size of Classical V Belt
| V-belt Type |
Top Width |
Pitch Width |
Height | Length | Length Range | Length Range |
Reinforcement | Angle |
| Conversion | (inch) | (mm) | Body | 40° | ||||
| O | 10 | 8.5 | 6 | lw=Li+25 | 15"-99" | 380-2514 | 7*4N*3 | 40° |
| A | 13 | 11 | 8 | lw=Li+33 | 19"-163" | 480-4139 | 7*4N*3 | 40° |
| B | 17 | 14 | 11 | lw=Li+43 | 25"-360" | 630-9159 | 8*5N*3 | 40° |
| C | 22 | 19 | 14 | lw=Li+62 | 49"-479" | 1256-12160 | 9*9N*3 | 40° |
Type and Size of V Ribbed Belt/Poly V Belt
| Type | Rib Section | Angle of Rib | Belt Width | Belt Thickness | Rib Number | Length Range |
| 3PK | 3.56 | 40 | 10 | 4.8 | 3 | 500-5000mm |
| 4PK | 3.56 | 40 | 13.6 | 4.8 | 4 | 500-5000mm |
| 5PK | 3.56 | 40 | 17 | 4.8 | 5 | 500-5000mm |
| 6PK | 3.56 | 40 | 20.7 | 4.8 | 6 | 500-5000mm |
| 7PK | 3.56 | 40 | 24.3 | 4.8 | 7 | 500-5000mm |
| 8PK | 3.56 | 40 | 27.8 | 4.8 | 8 | 500-5000mm |
| 9PK | 3.56 | 40 | 31.4 | 4.8 | 9 | 500-5000mm |
| 10PK | 3.56 | 40 | 35 | 4.8 | 10 | 500-5000mm |
| 12PK | 3.56 | 40 | 42.5 | 4.8 | 12 | 500-5000mm |
| 15PK | 3.56 | 40 | 53 | 4.8 | 15 | 500-5000mm |
Structure of V Belt
| Function | Material | |
| Tension Member |
The treated polyester cord is a low stretch high strength tension member able to withstand shock loads on drives with fixed centers |
Polyester/Aramid Fiber |
| Rubber Ribs |
Long wearing, oil resistant, fibre-loaded neoprene rubber is used in the ribs to provide support for the tension member and to transmit the loads to the pulley |
NR,CR,EPDM |
| Backing Material |
Bias ply type fabric backing resists cracking and provides abrasion resistance |
NR,CR,EPDM |
| Insulation Material |
oil and heat resistant rubber is used to bond the tension member to the rest of the belt |
NR,CR,EPDM |
Related Products
Work Place
Raw-Edge Toothed V-Belts for Harvesters, Buses and Trucks
Product Details
Type and Size of Classical V Belt
| V-belt Type |
Top Width |
Pitch Width |
Height | Length | Length Range | Length Range |
Reinforcement | Angle |
| Conversion | (inch) | (mm) | Body | 40° | ||||
| O | 10 | 8.5 | 6 | lw=Li+25 | 15"-99" | 380-2514 | 7*4N*3 | 40° |
| A | 13 | 11 | 8 | lw=Li+33 | 19"-163" | 480-4139 | 7*4N*3 | 40° |
| B | 17 | 14 | 11 | lw=Li+43 | 25"-360" | 630-9159 | 8*5N*3 | 40° |
| C | 22 | 19 | 14 | lw=Li+62 | 49"-479" | 1256-12160 | 9*9N*3 | 40° |
Type and Size of V Ribbed Belt/Poly V Belt
| Type | Rib Section | Angle of Rib | Belt Width | Belt Thickness | Rib Number | Length Range |
| 3PK | 3.56 | 40 | 10 | 4.8 | 3 | 500-5000mm |
| 4PK | 3.56 | 40 | 13.6 | 4.8 | 4 | 500-5000mm |
| 5PK | 3.56 | 40 | 17 | 4.8 | 5 | 500-5000mm |
| 6PK | 3.56 | 40 | 20.7 | 4.8 | 6 | 500-5000mm |
| 7PK | 3.56 | 40 | 24.3 | 4.8 | 7 | 500-5000mm |
| 8PK | 3.56 | 40 | 27.8 | 4.8 | 8 | 500-5000mm |
| 9PK | 3.56 | 40 | 31.4 | 4.8 | 9 | 500-5000mm |
| 10PK | 3.56 | 40 | 35 | 4.8 | 10 | 500-5000mm |
| 12PK | 3.56 | 40 | 42.5 | 4.8 | 12 | 500-5000mm |
| 15PK | 3.56 | 40 | 53 | 4.8 | 15 | 500-5000mm |
Structure of V Belt
| Function | Material | |
| Tension Member |
The treated polyester cord is a low stretch high strength tension member able to withstand shock loads on drives with fixed centers |
Polyester/Aramid Fiber |
| Rubber Ribs |
Long wearing, oil resistant, fibre-loaded neoprene rubber is used in the ribs to provide support for the tension member and to transmit the loads to the pulley |
NR,CR,EPDM |
| Backing Material |
Bias ply type fabric backing resists  cracking andprovides abrasion resistance |
NR,CR,EPDM |
| Insulation Material |
oil and heat resistant rubber is used to bond the tension member to the rest of the belt |
NR,CR,EPDM |
With high quality and competitive price
Prompt delivery
Packing as per customer’s demand.
We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.
Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.