This standard range of Servo-Worm Reducers are ideal for use in applications that demand powerful, precise positioning and repeatability. These were specifically developed for make use of with state-of-the-art servo engine technology, providing tight integration of the engine to the machine. Angular backlash of less than 1 arc-minutes is provided standard.

They are available in four sizes (50 mm to 100 mm center distance) with input speeds up to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output worm drive servo china torque capacities up to 885 lb.ft. A wide variety of engine couplings and mounting flanges are available for assembly to practically all servo motors, and the hollow bore result can be utilized to mount output shafts, pinion shafts, or other drive elements.

Usual applications for these reducers include precision rotary axis drives, traveling gantries & columns, materials handling axis drives, zero-backlash axis drives and electronic line shafting. Industries served include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors possess a torque range of 92 Nm to 520 Nm. As angular drives they are especially space-saving and decrease the expenditure for valuable installation space.

The helical-worm servo gearmotors were created in such a way that they guarantee you a low-noise system environment. Moreover, these gearmotors provide you with excellent attenuation properties for the operation of your systems with low degrees of vibration. This is because of the longitudinal application of push on the insight shaft. This enables torque impulses to become prevented efficiently and for optimum results in terms of running smoothness and noise reduction to be performed.

Both the equipment unit, and the synchronous servomotor derive from our modular program. This enables you to have fully individual configuration options for every application. One matter is certain – Our servo gearmotors are real specialists for very specific requirements.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, rate reducers, worm equipment reducers and worm drive gearboxes. Gear reduction boxes feature a gear arrangement when a gear in the type of a screw, also called a worm, meshes with a worm equipment. These gears are usually made from bronze and the worms are steel or stainless steel.

While worm gears are similar to a spur equipment, the worm gearboxes are significantly smaller than other gear reduction boxes. A major benefit of worm equipment reducers can be that they create an output that’s 90° from the input and can be used to transmit higher torque or decrease rotational speed. Most often, a worm gearbox offers right hand threads; to improve the direction of the result, a left-hands thread worm gearbox is required.
At times a motor’s capability could be limited to the stage where it requires gearing. As servo producers develop more powerful motors that can muscle applications through more difficult moves and produce higher torques and speeds, these motors need gearheads equal to the task.