pto gearbox
two) Loosen the bolts only when fitting the shafts. DO NOT remove the bolts fully. If taken out they could fall into the housing and lead to a failure. The box should #imgurl[http://agricultural-gearbox.xyz/Content/upload/2019369030/201903071434159941137.png]#be disassembled to retrieve the bolts if this happens.
1) Tighten bolts to stay away from oil leaking during operation. (The bolts have a seal below their heads.)
Just take care when tightening the four x locking bolts inside the housing. These bolts correct the detachable splined shafts in spot.
Note: When fitting splined shafts.
Simply click on drawing to enlarge.
1:1.eighty five velocity increaser with thirteen/4″Z20 splined output shaft.
We understand pto gearbox and we at https://www.timing-pulley.net/product/hydraulic-pto-drive-gearbox-spped-increaser/ desire you to be an expert as well.