Product features
Solitary strand sprocket with 1 set of teeth around the circumference for applications in which a single chain may support the torque and load
Pitch of 3/4 inch for size 60 chains
Sprocket bore and hub with QD fittings for inserting and locking bushings into place
Type B sprocket with a hub projection using one aspect to accommodate numerous kinds of bushings to greatly help prevent sprocket from slipping on the shaft
Sprocket teeth assist in preventing slipping and binding to avoid power loss in assemblies
Product description
This Tsubaki roller chain sprocket includes a 3/4-inch pitch, fits size 60 chains, and is single strand with one group of teeth around its circumference for use with single strand chains. It is a sort B sprocket with a hub projection encircling the bore using one side, and both hub and bore have Quick-Disconnect (QD) fittings for inserting and locking into place different QD bushings based on the diameter of the shaft. The teeth of the sprocket help prevent slipping and binding to avoid power reduction in assemblies. It meets International Organization for Standardization (ISO) 9001 for quality assurance. This one strand roller chain sprocket is suitable for use in a wide range of applications regarding light to moderate loads and ongoing, high-cycle operations, including automobile transmission systems, structure and agricultural gear, conveyors, and factory manufacturing and assembly lines, amongst others.
A roller chain sprocket is a thin wheel with deep, uniformly spaced teeth ringing its circumference. The length from the peak of one tooth to another is named the pitch, and is commonly measured in 1/8-inch increments. The sprocket transfers power and movement by a roller chain that’s threaded over the teeth of the sprocket. The alignment of the chain with the sprocket’s pitch prevents the chain from slipping to ensure 
that no power is usually lost. In the center of the sprocket may be the bore (hole) for sliding the sprocket onto a shaft, and a bushing or bearing is definitely often suited to the sprocket’s hub to custom-fit the sprocket onto a shaft to hold it firmly in place. A hub is definitely a protruding, elevated lip encircling the bore of the sprocket. Sprockets with hubs on both sides are Type C, sprockets with hubs on one aspect are Type B, and sprockets with no hubs are Type A sprockets. For applications needing sprockets to be swapped onto shafts of different diameters, a sprocket with a bore large enough to match all shafts may be used, with the gap between your bore and shaft closed with a bushing or bearing. Roller chain sprockets are used in a broad range of applications where the drive power of an engine needs to be transferred into motion, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining apparatus, aeronautics, robotics and space exploration, among others.
U.S. Tsubaki Power Tranny manufactures a variety of chains, sprockets, and various other power transmission components that meet International Business for Standardization (ISO) requirements for quality assurance. The company, founded in 1917, can be headquartered in Wheeling, IL.