Product features
One strand sprocket with 1 group of teeth around the circumference for applications in which a single chain can support the torque and load
Pitch of 3/4 inch for size 60 chains
Sprocket bore and hub with QD fittings for inserting and locking bushings into place
Type B sprocket with a hub projection using one side to accommodate numerous kinds of bushings to help prevent sprocket from slipping on the shaft
Sprocket teeth assist in preventing slipping and binding to avoid power loss in assemblies
Product description
This Tsubaki roller chain sprocket has a 3/4-inch pitch, fits size 60 chains, and is single strand with one set of teeth around its circumference for use with single strand chains. It really is a Type B sprocket with a hub projection encircling the bore using one side, and both the hub and bore possess Quick-Disconnect (QD) fittings for inserting and locking into place different QD bushings based on the diameter of the shaft. One’s teeth of the sprocket assist in preventing slipping and binding to avoid power loss in assemblies. It fulfills International Corporation for Standardization (ISO) 9001 for quality assurance. This one strand roller chain sprocket is usually suitable for use in a wide range of applications concerning light to moderate loads and ongoing, high-cycle procedures, including vehicle transmission systems, structure and agricultural equipment, conveyors, and factory production and assembly lines, among others.
A roller chain sprocket is a thin wheel with deep, uniformly spaced teeth ringing its circumference. The distance from the peak of one tooth to the next is called the pitch, and is commonly measured in 1/8-in . increments. The sprocket transfers power and movement by a roller chain that is threaded over the teeth of the sprocket. The alignment of the chain with the sprocket’s pitch helps prevent the chain from slipping so that no power is usually lost. In the center of the sprocket may be the bore (hole) for sliding the sprocket onto a shaft, and a bushing or bearing is usually often suited to 
the sprocket’s hub to custom made-match the sprocket onto a shaft to hold it firmly set up. A hub is definitely a protruding, raised lip encircling the bore of the sprocket. Sprockets with hubs on both sides are Type C, sprockets with hubs using one aspect are Type B, and sprockets with no hubs are Type A sprockets. For applications requiring sprockets to be swapped onto shafts of different diameters, a sprocket with a bore large enough to match all shafts may be used, with the gap between the bore and shaft closed with a bushing or bearing. Roller chain sprockets are found in a broad selection of applications where in fact the drive power of an engine needs to be transferred into motion, such as in automobiles, conveyors, escalators, agricultural, forestry and mining products, aeronautics, robotics and space exploration, among others.
U.S. Tsubaki Power Transmission manufactures a number of chains, sprockets, and additional power transmission elements that meet International Firm for Standardization (ISO) criteria for quality assurance. The business, founded in 1917, is certainly headquartered in Wheeling, IL.