900 CLASS SUGAR MILL CHAINS 901 902 907 5174

900 SERIES PINTLE CHAINS, sometimes referred to as “sugar mill” or “intermediate carrier chain” can be used extensively in sugar mills. Multiple strands of 900 Pintle Chain, available with a couple of holes per link, can be fitted with overlapping beaded carrier slats to form a continuing apron conveyor for intermediate carrier program.
The pin holes at the closed end of the 900 Class hyperlink are given with smooth bushings which are press-fitted in to the links and keyed into place. The bushings are renewable and may be powered out and replaced if they become worn. 900 Class Pintle Chain is designed with dual barrels, one on each part of the open up end of the links, to support double sprockets. The objective of this driving technique is to get rid of the possibility of material build-up in the sprocket get in touch with area, which often causes the chain to jump the sprocket. Large ribs rigidly reinforce these generating barrels.
Our 900 Class chain links, with tensile power from 22,500 to 32,500 pounds, can be found with large sliding areas to reduce chain wear and prolong chain lifestyle. Broad wearing areas and weighty cross sections synergy to provide a substantial link which is made according to manufacturer’s specifications and can perfectly replace links made by other manufacturers.
Brutaloy sprockets for 900 Class Pintle Chain are readily available in 3.170 inches. 900 Class Pintle Chain should only be allowed to travel in a single direction; links should always run in direction of their shut narrow end.
Obtainable in cottered construction only, 900 Class Chain is certainly assembled with T-headed pins which are locked into place by two lugs cast on the ends of the driving barrels to prevent pin rotation. Pin rotation during operation would result in wear within the bushing. Both mind of the pin and the cottered end of the pin are Transmission Chain guarded by cast lugs on the barrel end of the links.
Material
900 Class Pintle Chain are links cast of malleable iron or Promal (Duramal). It is furnished with carbon metal high temperature treated pins and carbon metal case hardened bushings as standard. However, stainless steel pins and bushings can be provided when specified.