Drive sprocket

A chain and sprocket drive is a type of power transmission in which a roller chain engages with two or more toothed wheels or sprockets, found in motors as a drivefrom crankshaft to camshaft.
Ever-vitality is proud to stock a wide selection of Sprockets along with this huge selection of agriculture, gardening, preparing food and outdoor products. We stand behind all 26,000 products we sell with our Satisfaction Guarantee. Customer Service may be the cornerstone of us business, and has recently been for over 50 years.
Application
Ever-power drive sprockets provide rugged, reliable service and feature replaceable tooth plates for easy field maintenance. Tooth plates for 102 and 142 series chain can be found with a segmental/symmetrical reversible tooth profile. The 142 DBL, TPL plus the 175 and 260 series use our nonsymmetrical profile.
Drive sprockets weren’t always made to be bolted about. At one time these were welded onto the final drive motor and had to be trim off when they were replaced. Finally, welded-on adapters were set up that allowed the sprocket to become bolted on, and more modern designs utilize the bolted approach altogether.
When someone sends in a final drive motor for us to take a look at or?rebuild/reman, we advise them to remove the sprocket. We don’t require the sprocket in place to evaluate the motor and the added fat (that can be significant) unnecessarily increases your shipping costs.
Signs of Sprocket Wear
One’s teeth on a travel sprocket are where you look for wear . They must be tall and flat towards the end, not sharpened or dished by the end. And the sprocket, and more specifically its teeth, begin to wear, its size becomes smaller sized. This causes what is referred to as a pitch mismatch, where the the teeth on the sprocket no more connect to the track backlinks as effectively. This may accelerate the put on of the sprocket and decrease the efficiency of your tools.
If your sprocket shows sign of excessive wear, then its time to displace it before it starts to cause abnormal track wear or begins to negatively affect the performance of your final drive electric motor.
Preventing Sprocket Wear
One of the key methods to prevent accelerated sprocket wear is to check on the track stress. If the strain is too tight, it’ll cause put on on the sprocket tooth. We’ve talked before about the importance of keeping the undercarriage clean, and the condition of the undercarriage can affect the track tension (especially if there is a build up of dried mud and particles). That’s part of the motive we put so much emphasis on keeping the undercarriage clean
Conclusion
Without a functioning drive sprocket, your track drive won’t be able to propel your equipment. Fortunately, there are ways to help your travel sprocket go longer: keep the track tension at an effective level and maintain your undercarriage clean.
DRIVE SPROCKET
The undercarriage of your track machine ought to be inspected regularly. If you discover early wear or damage to your tracks, a put on sprocket may be the cause.
15 cogs / teeth
16.77 inches in diameter
12 equally spaced bolt holes
Fits the next Bobcat Compact Track Loaders: T180, T190, T550, T590
Parts can vary according to your serial number.
All Ever-vitality sprocket tooth profiles are induction hardened to 55 Rockwell C., and are replaceable. The replacement and repair of tooth plate segments does not require removal of the travel shaft, bearings, etc. Ever-power also designs custom split hub parts for retrofit applications that minimize field labor costs.
At initially glance, you might feel that if you’ve seen one drive sprocket, you’ve seen them all. However, Ever-vitality features added an I.D. lip and spiral band that captivate the needle bearing along with an exterior snap ring that raises performance and dependability. While simple to overlook, it’s this focus on aspect that the racer offers come to expect from Ever-power.
An We.D. lip and spiral band that captivate the needle bearing
External snap ring caps sprocket in drum & increases durability
CNC-machined teeth include a corrosion-resistant finish
Specifics:
Chain Type: #219
Tooth Configuration: Standard