Gear rack is a special gear whose teeth are distributed in the strip.
1. The basic concept:
The rack can be split into a spur gear rack and a helical gear rack, 
which are paired with a spur gear and a helical gear, respectively; the tooth profile of the rack is a straight line rather than an involute (planar for the tooth surface) , equal to the indexing circle radius is certainly infinite cylindrical gear.
2. The main features:
(1) Because the tooth profile of the rack is straight, each point on the tooth profile gets the same pressure position and is equal to the inclination position of the tooth profile. This angle is called the tooth position and the typical value is 20°.
(2) The same pitch and modulus are provided on the right lines parallel to the very best line.
(3) A range parallel to the top line of the tooth and having a tooth thickness equal to the width of the tooth groove is named a dividing line (middle line), which is a reference collection for calculating how big is the rack.
3. The main parameters:
Groove width, high tooth suggestion, high root height, tooth elevation, tooth thickness, root radius, etc.
4. The choice of parameters:
(1) Whether the gear is beating, the entire tooth depth, the common normal collection, the tooth path is qualified, the tooth pitch is poor, and the circumferential section error is out of tolerance.
(2) If the installation distance following the gears and racks are installed is appropriate.
(3) The rack and gear meshing clearance ought to be 0.25* modulus.
(4) Whether the full tooth depth, runout, and common normal line of the rack are skilled.
5. Processing methods:
Gear rack and pinion machining method:
(1) hobbing
(2) gear shaping
(3) shaving
(4) grinding teeth
(5) molars
Exactly what is a gear rack?
Tags: