“H” CLASS Refuse Drag Chains is utilized for conveying sawdust,wood chips, pulp, garbage, tankage, ashes, and other abrasive waste Conveyor Chain materials through either wooden or metal troughs. Due to its large, wide opening region, “H” CLASS Refuse Drag Chain provides sizeable having capacity when operated at moderate speeds.
Leading face of each barrel is flat, providing a wide area to push material along the trough and also to keep the chaim from riding over the top of the material. The rounded inner aspect of the barrel is usually carefully shaped to make excellent sprocket get in touch with. Sidebars are reinforced with wearing sneakers which provide both
additional wearing surface area and stiffening for the hyperlink. A vertical member on each sidebar assures added hyperlink rigidity and defends the pin from damage.
“H”CLASS Refuse Drag Chain comes in EVRT-POWER Promal or Duramal with a tensile power selection of 36,400 to 52,000 pounds. This rugged working chain comes in a pitch range of 5.000 to 8.000 inches. Each hyperlink is produced in accordance with manufacturer’s specifications and may end up being interchanged with links created by additional chain 
manufacturers. “H”CLASS Refuse Drag Chain is available in riveted construction only. Grease chambers, cored into each link’s barrel, hold grease which lubricates pins.
Wide faced sprockets, either of machined or cast steel, are recommended for”H” class Refuse Drag Chain operation. Links should always be operate in the direction of the closed barrel.
“H” CLASS Refuse Drag Chains (H102/H104/H110/H112/H116/H120/H480)
Tags: