What is pin bush coupling?
Industrial Pin Bush Coupling
The function of a flexible coupling is to transmit torque from on shaft to some other where limited mis alignment might occur and also to absorb shock loads.
We are among the prominent institutions engaged in providing Pinbush Coupling which has highly developed rubber substances for use in bushes to soak up shock, tensional vibrations and minor misalignments. These couplings are flexible in type and tend to be of the cushioned drive type that is utilized for transmitting the torque through the best possible tensile steel bolts to the device input. Moreover, they are simple and small in construction that makes these with the capacity of transmitting great torques at optimum speeds. These types of couplings generally permit travel in either way and need neither lubrication, nor adjustment after fitting.
Pin and Bush Couplings
lubrication-free
Features
Vertical/horizontal mounting
Adsorbs vibrations
Progressive torsion springtime properties due to primarily pressurised bushings
Fail-safe in the event of the failure of the bushings
Convenient replacement of bushings without disassembly of the coupling halves
Free of maintenance, no lubrication necessary
Declaration of conformity in accordance with ATEX 2014/34/EU possible
Typical applications
Pump drives
Belt drives
Ventilators
General mechanical engineering
Ever-power pin and bush coupling
Ever-power couplings consist of a couple of resilient BARREL Shaped bushes with pins & nuts and two flanged hubs of graded cast iron.
The special BARREL shaped bushes let the MISALIGNMENT IN ALL DIRECTIONS and give extra torsional flexibility in comparison with plain bushes.
These couplings are suitable for basic engineering application requiring reliable power tranny even below conditions of shaft misalignments which are generally unavoidable.
Description
Ever-power couplings are used as flexible compensating couplings in all applications requiring a reliable tranny of torque under harsh operating circumstances. The conical chairs of the buffer pins facilitate mounting and guarantee maintenance-free procedure. The optimized condition of the barrelled buffers allows simple plug-in assembly and low circumferential backlash. Many type variants can be found, e. g. with brake disk, axial play limiting product, or brake engine couplings.
To the top of the page
Examples of application
Ever-power couplings are being used on the whole mechanical engineering both since high-quickness couplings and for high torques, e. g. in
Cranes
Conveyors
Blowers
Screw pumps
Cableways
Mixers
Cement processing machines7
To the top of the page
Advantages of the product
Flexible fail-secure pin and bush coupling for medium up to high torques
Compact style; low weights and mass occasions of inertia
Independent of direction of rotation (suitable for reversing operation)
Ideal for plug-in assembly (blind assembly, bell housing installation)
Torque range of the standard series between 200 Nm and 1,300,000 Nm
Can be used in potentially explosive atmospheres; certified acc. to 94/9/EC (ATEX 95)
Pin & Bush Couplings
Simple and almost indestructible, the pin and bush design and style is perfect for applications that involve safeness, such as elevator drives or fire pumps. The fail-safe aspect of the design allows the coupling to become serviced at convenient intervals, should the elastomer become damaged.
The elastomer elements decrease vibration and dampen impact loads, along with accommodate misalignment up to 0.5 degrees. The initial bushing is normally a neoprene elastomer with a graphite impregnated bronze sleeve. These are still available, as well as a contemporary version of this concept: urethane bushings.
Ever-electricity also manufactures many custom variations of the coupling including brake drum and shear pin type couplings.
Damping shaft coupling that works extremely well universally to pay for shaft misalignment
Nominal torque range from TKN = 19 Nm up to 62,000 Nm with 23 sizes
Temperature range: from -50 °C to +100 °C
​
Robust and confirmed a million times
Because of their torsional overall flexibility, Ever-power couplings can maneuver critical torsional vibrations away from the operating area of mechanical equipment in such a way that no negative effects on the drive train should be expected. Ever-power couplings are made of high-top quality cast iron. The flexible elements made of synthetic rubber (Buna-N) are available in different degrees of hardness for many applications. Metal pins and flexible components are designed so that no have on occurs if they are properly fitted.
Your benefits at a glance
Fail-safe for maximum operational reliability
Three-part type ideal for plug-in assembly and simplified alternative of elements
Choice of elastomer hardness to suit various applications
Ideal for use in potentially explosive environments; certified according to
2014/34/EU (ATEX)
High degree of availability of parts ex stock
Established as an industrial standard, worldwide used
Mining and Cement: heat technology
Oil and Gas: pumps, fans, compressors, surroundings condensers
Power Generation: pumps, admirers, compressors, air condensers, drinking water turbines
Chemical compounds and Pharmaceuticals: driers, lauter tuns, pumps, enthusiasts, compressors, mixers, agitators, reactors
Plastic and Rubber: solo- and double-screw extruders
Pulp and Paper: wastewater purification plants
Water and Wastewater: aerators
Food and Beverage: lauter tuns, reactors, agitators, mixers
Did 
you know?
Original Ever-power elastomers ensure the optimal operation of your system. The flexible elements of the Ever-power coupling are subject to compression. If the versatile elements are irreparably destroyed, the hub parts come into contact with metal. This “emergency procedure capability” is necessary, e.g., regarding fire pump drives.